Template Commands

Template Commands will allow you to create commands that can be sent from GpsGate to your devices in many ways.

Where you can send commands from

• Manually from the Vehicle panel, using Command Tags.
• Automatically, from an Event Rule, for example when an event occurs (e.g. SOS).
• Manually, from the Fleet App.
• Manually, from the mobile browser.
• Manually, from the Terminal Window.
• In batches, using the Device Manager.

Creating the command

1. In Site Admin, go to Devices > Commands

2. Select your device Brand

3. Click in New Command

4. Enter a name for your command.

5. Fill in with the Command and sending methods

6. Save your command.

7. Mark your command as Queueable (recommended)

8. Select which model/s you want this command to be available to.

9. Save your command.

Notes

• To send commands over SMS, you need to enable an SMS provider.
• GpsGate does not provide you with commands or configuration software for your devices.
• We recommend verifying your device documentation or check with your device support which is the right command to configure your devices to point to your newly installed GpsGate IP and port.