Add a device from SiteAdmin into an application
If you haven't created the Device user type to link your device with a user in GpsGate, you can still add it using the SiteAdmin method. Follow these steps:
1 - Configure the device to send data to your GpsGate Server Public IP Address (found on SiteAdmin/Devices) and the port for the device you are using.
2 - Make sure that the device is configured correctly. Read the Trouble shooting guide and run the connectivity tests. If you get any trouble while connecting a device to GspGate Server review the Trouble shooting guide again.
3 - Turn on the device and put it under clear sky
4 - Login to Site Admin
5 - Click on Devices tab in Site Admin
6 - If the device is sending data you will see 1 unknown device
7 - Click on 1 unknown device button
8 - Enter the information needed to assign the device to a new user and select the application the user will be added to.
9 - Login to the application and you will see the device online