Sierra Wireless RAP, TAIP and NMEA protocols device setup

This guide shows how to set up RAP, TAIP and NMEA.

If you use NMEA the routers need a static IP.

Sierra / Cradlepoint devices (RAP Protocol)

Plugin

1. Login to Site Admin
2. Go to Plugins > Get more plugins.
3. Install Sierra plugin.

How to add a device in the application

1. Login to your application
2. Click + User
3. Select Device in User Type drop-down list. Click Next.
3. Enter a Username and a Name, which is the name displayed on the map and in list. Click Next.
4. Click on Next for Roles.
5. Click on Next for Tags.
6. Select Device Type > PinPoint...
7. Fill in the DEVICE ID of the tracker.
8. Click Save.

For more information about adding device users read this guide.

Configure your device to send data to your servers public IP port 22335. You find the public IP in Site Admin under Devices.

Setup device

1. Set *PPID to your servers IP address, you find this setting under PINPOINT > Server 1
2. Set *PPDEVID to 1- TRUE, you find this setting under PINPOINT > Server 1
3. Set *PPSNF to "11-GPS Data", "12-GPS+Date", "13-GPS+Date+RF" or "14-GPS+Date+RF+EIO" under PINPOINT > Server 1
4. Set the device "DEVICEID" (in VehicleTracker) to *DEVICEID", which you find under "STATUS" in AceManager.

Trimble devices (TAIP Protocol)

Device example: Trimble Trimtrac 

Plugin

1. Login to Site Admin
2. Go to Plugins > Get more plugins.
3. Install Trimble plugin.

How to add a device in the application

1. Login to your application
2. Click + User
3. Select Device in User Type drop-down list. Click Next.
3. Enter a Username and a Name, which is the name displayed on the map and in list. Click Next.
4. Click on Next for Roles.
5. Click on Next for Tags.
6. Select Device Type > TAIP...
7. Fill in the Vehicle ID of the tracker.
8. Click Save.

For more information about adding device users read this guide.

Configure your device to send data to your servers public IP port 8000. You find the public IP in Site Admin under Devices.

Smartpipe devices (NMEA Protocol)

Device example: SmartPipe

Plugin

1. Login to Site Admin
2. Go to Plugins > Get more plugins.
3. Install SmartPipe plugin.

How to add a device in the application

1. Login to your application
2. Click + User
3. Select Device in User Type drop-down list. Click Next.
3. Enter a Username and a Name, which is the name displayed on the map and in list. Click Next.
4. Click on Next for Roles.
5. Click on Next for Tags.
6. Select Device Type > SmartPipe Static IP...
7. Fill in the Static IP of the tracker.
8. Click Save.

For more information about adding device users read this guide.

Configure your device to send data to your servers public IP port 30176. You find the public IP in Site Admin under Devices.

Please note that each device must have a unique Static IP, since there is no other ID in the data sent to the server!